Product Center

Products

Cooperation Intention Table

Cooperation Intent Form

Stacked screw sludge dewatering machine

The working principle of the stacked screw sludge dewatering machine is that the fixed ring and the moving ring are stacked on each other, and the screw shaft penetrates through the filter device to promote.

Category： Other non-standard equipment

Inquiry Recommend

Product Details

Product Introduction

The front end is the concentration part and the back end is the dehydration part. The filter gap formed between the fixed ring and the moving ring and the pitch of the spiral shaft gradually decreases from the concentration section to the dehydration section.

The rotation of the screw shaft pushes the sludge from the thickening part to the dewatering part, and at the same time, it also continuously drives the swimming ring to clean the filter seam to prevent blockage.

After the sludge is concentrated without gravity concentration, it is transported to the dewatering department. In the process of advancing, with the gradual decrease of the filter seam and the pitch, and under the action of the pressure plate, great internal pressure is generated, and the volume is continuously reduced., To achieve the purpose of full dehydration.

Technical parameters of equipment

Model	Dry sludge treatment capacity (KgDs/h)	Total power (Kw)	Dosage of cleaning water (L/h)	Dimensions (mm)L * B * H
DL101	6	0.60	16	17859001821
DL201	20~45	1.5~2.0	32	17859001821