Desulfurization and dehydration equipment

The complex iron desulfurization technology is a wet oxidation method with complex iron as catalyst, which is characterized by directly converting H2S into element S, and the content of H2S after purification is less than 100ppm. This method is a new type of desulfurization technology with high efficiency and environmental protection, and the sulfur recovery rate reaches 99%. The system has the advantages of high sulfur capacity, skid-mounted, low operating cost and high stability.

Biogas double film gas cabinet

The double-membrane gas cabinet forms two spaces through the bottom membrane, the inner membrane and the outer membrane. The inner membrane space is used as the gas storage space to store various gases, and the space between the outer membrane and the inner membrane is used as the pressure regulating space. When the stored gas increases, the inner membrane expands, and the control device removes the pressure regulating air from the outer membrane to free up a certain capacity. When the gas stored in the inner membrane is less, the control device injects air into the pressure regulating chamber to balance the pressure in the cabinet and stabilize the stiffness of the outer membrane. The double-film gas cabinet has simple structure, convenient operation and maintenance, and the film material is made of corrosion-resistant special composite materials. It is composed of high-strength tensile fiber, air-tight anti-corrosion coating and surface coating, and has anti-corrosion, anti-aging, anti-microbial and UV functions. The shape of biogas ground double film gas storage cabinet is usually 3/4 sphere or hemisphere, which is fixed on the base by rail and bolt.

Sewage treatment and reclaim water reuse project of a chemical enterprise in Gansu

This project is a 200m/d high-salt and high-difficulty organic wastewater treatment project of a chemical plant in Gansu. The project adopts the following process: Fenton biochemical regulating tank anaerobic reactor A/O biochemical treatment process Fenton quartz sand activated carbon UF RO treatment process; The effluent quality shall be COD ≤ 100mg/L; The project design adopts integrated steel structure and all-above-ground sewage treatment integrated equipment. This system has strong treatment capacity and can adapt to complex wastewater treatment and wastewater treatment with high organic matter and salt content. Floor space: 36.0m * 44.0m Total Project Investment: 5.5 million

Sewage Treatment Enamel Assembled Tank Project of a Food Factory in Suqian

The company is mainly engaged in the design, construction, commissioning and operation of high-salt and high-organic wastewater treatment. Its main business is the treatment of high-concentration organic wastewater such as pharmaceutical and pesticide intermediates chemical wastewater, food wastewater, papermaking wastewater, and landfill leachate.

Dust Transformation Project of a Steel Plant in Gansu Province

According to the site situation and the requirements of the owner, our company decided to adopt the design idea of Venturi water film dust collector (system structure transformation) wet dust removal reverse spray washing equipment water film drop tower equipment dehydration equipment. Purification of existing flue gas dust equipment, the main ideas are as follows: 1) The internal structure of the existing Venturi water film dust collector is reformed, and the cooling effect is mainly on the premise of partial dust reduction, so as to ensure the stable treatment of the rear purification equipment under the medium meeting the inlet air temperature. 2) The newly-built desulfurization system equipment is mainly used to purify the flue gas dust containing sulfide through dosing. 3) Newly built wet dedusting reverse spray washing equipment water film downpour tower equipment, the gas with dust will enter the wet dedusting reverse spray washing equipment, and most of the viscous dust in the dust gas will be dissolved in water by fully mixing with water, and will settle down in the wet dedusting reverse spray washing equipment for removal, and the waste gas will enter the water film downpour tower equipment again to remove the remaining dust content in the waste gas through full contact with the water film and waste gas, ensure compliance treatment. 4) The cold air circulation system is designed at the end to condense the water from the wet dust removal equipment and the dust contained in the water to ensure the drying of the flue gas and prevent the serious vibration of the rear fan. 5) Upgrade the existing fans, pipelines, control, etc. 6) The purified gas is discharged to the new or existing chimney through the pipeline.